More Results

More Results

Ditch the Cables and Conduit. Make Replacement Easier.

A fully wireless detection system that is easier to install, maintain, and replace.

Time to Replace or Refresh Your Traffic Detection?

Inductive loops fail — cracked pavement, severed conduit, a resurfacing project that catches you off guard. When they do, the fix usually means saw cuts, lane closures, and a repair crew for what should be a quick swap.

The Sensys Networks Flex suite gives you a wireless alternative. Sensors install in minutes with no saw cuts or trenching, and the rest of the system keeps cables and conduit out of the equation — from the roadway to the controller cabinet.

A Fully Wireless System, Roadway to Cabinet

Each Flex component handles one part of the path. FlexMag3 sensors detect vehicles in the lane, FlexRepeat Solar extends range where needed, and FlexRadio Cabinet Mount, FlexControl Module, and FlexConnect bring the data into the controller — without lead-in wires.

FlexMag3 EZ-Out wireless traffic detection sensor

FlexMag3 with EZ-Out

Wireless in-road sensors that install in minutes and come out just as easily.

  • Installs in a small drilled hole with no saw cuts or trenching, using minimal epoxy and only rolling closures.
  • EZ-Out cup and clip system allows sensors to be removed for maintenance, replacement, relocation, or reuse.
  • Well suited to loop replacement, repaving projects, temporary deployments, and advance or midblock detection far from power or communications.

FlexRepeat Solar

A solar-powered repeater that extends the reach of your wireless detection network.

  • Provides a two-way relay between sensors and the rest of the wireless network.
  • Extends range to advance and midblock detection locations.
  • Solar powered, with external antenna options for flexible configuration — a building block of a fully wireless detection network.
FlexRadio Cabinet Mount and Antenna

FlexRadio Cabinet Mount

Brings your wireless network directly into the traffic cabinet.

  • Transmits data between sensors or repeaters and the FlexControl gateway in the controller cabinet.
  • Radio mounts inside the cabinet, with an antenna mounted on top.
  • Enables a totally wireless detection system, with no lead-in wires from the roadway.

FlexControl Module

The gateway that manages your wireless detection network from inside the cabinet.

  • Manages radio communications, sensor data processing, and firmware updates for wireless components.
  • Enclosed module mounts to the cabinet by bracket or DIN rail, with no card rack slot required.
  • Supports up to two radios or antennas for maximum detection coverage, while consuming less than 1 watt of power.

FlexConnect

An SDLC interface that simplifies the controller cabinet.

  • Provides an SDLC interface to TS2 controllers for Sensys Networks gateways.
  • Replaces the functionality of one or more EX cards, with up to 64 channels.
  • Reduces system cost and frees up card slots in the controller cabinet.

Not Sure Where to Start?

Tell us what you have in the field today — loops, older wireless detection, or something else. Our team can help you plan the right replacement.

Talk to Us About Your Project